ratiotec X 500 Manual Del Usuario página 5

3. CLEAR: ___________
Delete counting result (press the button for three seconds).
The CLEAR button takes you back a step in the user menu.
4. START: ___________ Start counting procedure
Start of the counting procedure/restarting of the counting procedure following error
message.
5. AUTOSTART: ______ You can activate/deactivate the device's automatic counting start by holding down
the 6 button.
6. SPEED: __________ Speed setting by pressing the 7 button for three seconds.
Setting the speed mode with the touch function: 1. 800 | 2. 900 | 3. 1,000 banknotes
per minute.
7. PRINT: ___________ Print the result of the count by pressing the 8 button for three seconds, after which a
brief alarm will sound.
8. S/N: ____________ Print out the serial number by pressing the 9 button for three seconds, after which a
brief alarm will sound.
Press the 4 button, to switch ON/OFF the serial number identification function. The
serial number recognition is in all orientations possible.
9. FACE/ORI: ________ Press the 0 button for three seconds to select the side (FACE) and the orientation
(ORI).
FACE refers to the side of the banknotes (front or back).
ORI refers to the side of the banknotes according to orientation.
On switching on the Mix mode, the banknotes can be counted and sorted, differenti-
ated according to FACE or ORI.
Example: If the side of the banknotes (FACE) is set, the banknotes that were inserted
according to orientation (ORI) fall separately into the reject stacker and are differen-
tiated from the other banknotes.
Banknote Banknote
Vorderseite Rückseite
Banknote
Vorderseite
[ EN]
5