Abicor Binzel SR/ABITIG GRIP Instructivo De Servicio página 14

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these operating instructions as become necessary due to misprints, inaccuracies
or product enhancements. Such changes will, however, be incorporated into subsequent editions of
the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their
respective owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com.
1 Identification
1.1 Marking
2 Safety
2.1 Designated use
2.2 Classification of the warnings
2.3 Special warnings for operation
2.4 Emergency information
3 Product description
3.1 Technical data
3.2 Signs and symbols used
4 Putting into operation
4.1 Setting up the torch body
4.2 Shortening the tungsten electrode EN-8
4.3 Connecting the cable assembly
4.4 Connecting the coolant
4.5 Setting the shielding gas volume
EN - 2
EN-3 5 Torch handle control
EN-3 elements
5.1 Trigger 2-cycle function
EN-3
EN-3 6 Operation
EN-3
EN-4 7 Putting out of operation
EN-4
8 Maintenance and cleaning EN-11
EN-5
EN-5 9 Disposal
EN-7
EN-7
EN-7
EN-8
EN-9
EN-9
®
SR/ABITIG GRIP
EN-10
EN-10
EN-10
EN-10
EN-13
BAL.0047 • 2019-06-19