ELMECO BIG BIZ Manual De Empleo Y De Mantenimiento página 15

General instruction
and warnings
Before switching on the
machine carefully read the
information in this service
manual; this way you will be
able to install, use and
maintain the machine
Keep the use and assembly
instructions, even for the next
buyer. The manufacturer
declines any responsibility for
damages deriving from the
non-observance of the
following instructions.
Install the machine according
to the assembly instructions.
The power supply must
correspond to the data on the
plate on the front side of the
machine behind the drip tray
(pic.1).
During maintenance and
cleaning, or in case of bad
functioning, disconnect the
machine from the power plug
(by pulling the plug and not
the cable) (pic.2 and 3).
Only specialized and
authorized staff can repair the
machine. Not perfect
repairing can be dangerous
for the user. Contact Elmeco
for information concerning the
closer authorized assistance
centre.
ì
- 14 -