BFT MOOVI 30 UL CSA Instrucciones De Uso página 10

ENGLISH
Thank you for buying this product. Our company is sure that you will be
more than satisfied with the performance of the product. This product is
supplied with a "WARNINGS" leaflet and an "INSTRUCTION MANUAL".
These should both be read carefully as they provide important information
about safety, installation, operation and maintenance.This product complies
with recognised technical standards and safety regulations. We declare that
this product is in conformity with the following directives: CAN/CSA-C22.2
No. 247-92 UL Std. No. 325 (Certificate: 1002906, LR100400 Date Issued:
August 24, 2005).
1) GENERAL OUTLINE
Compact electromechanical barrier suitable for limiting private areas, parkin-
gs, access areas for vehicles only. Available for passageways from 3 to 5
metres. Adjustable electromechanical limit devices ensuring a correct stop
position for the boom. In case of intensive use, a thermal sensor activates
the cooling fan.
The emergency release device for manual manoeuvre is controlled by a
personalised key lock.
The actuator is always supplied for left-hand side fitting.However, when neces-
sary, the opening direction can be reversed by means of simple operations.
The CBO mod. foundation base (on request) makes barrier installation
easier.
Appropriate fittings make it easy to install accessories without needing to
drill any holes.
2) GENERAL SAFETY
WARNING! An incorrect installation or improper use of the product can
cause damage to persons, animals or things.
• The "Warnings" leaflet and "Instruction booklet" supplied with this
product should be read carefully as they provide important information
about safety, installation, use and maintenance.
• Scrap packing materials (plastic, cardboard, polystyrene etc) according
to the provisions set out by current standards. Keep nylon or polystyrene
bags out of children's reach.
• Keep the instructions together with the technical brochure for future
reference.
• This product was exclusively designed and manufactured for the use
specified in the present documentation. Any other use not specified in
this documentation could damage the product and be dangerous.
• The Company declines all responsibility for any consequences resulting
from improper use of the product, or use which is different from that
expected and specified in the present documentation.
• Do not install the product in explosive atmosphere.
• The construction components of this product must comply with the following
European Directives: 89/336/CEE, 73/23/EEC, 98/37/EEC and subse-
quent amendments. As for all non-EEC countries, the above-mentioned
standards as well as the current national standards should be respected
in order to achieve a good safety level.
• The Company declines all responsibility for any consequences resulting
from failure to observe GoodTechnical Practice when constructing closing
structures (door, gates etc.), as well as from any deformation which might
occur during use.
• The installation must comply with the provisions set out by the following
European Directives:89/336/CEE, 73/23/EEC, 98/37/EEC and subsequent
amendments.
• Disconnect the electrical power supply before carrying out any work on
the installation. Also disconnect any buffer batteries, if fitted.
• Fit an omnipolar or magnetothermal switch on the mains power supply,
having a contact opening distance equal to or greater than 3,5 mm.
• Check that a differential switch with a 0.03A threshold is fitted just before
the power supply mains.
• Check that earthing is carried out correctly: connect all metal parts for
closure (doors, gates etc.) and all system components provided with an
earth terminal.
• Fit all the safety devices (photocells, electric edges etc.) which are needed
to protect the area from any danger caused by squashing, conveying and
shearing, according to and in compliance with the applicable directives
and technical standards.
• Position at least one luminous signal indication device (blinker) where it
can be easily seen, and fix a Warning sign to the structure.
• The Company declines all responsibility with respect to the automation safety
and correct operation when other manufacturers' components are used.
• Only use original parts for any maintenance or repair operation.
• Do not modify the automation components, unless explicitly authorised
by the company.
• Instruct the product user about the control systems provided and the
manual opening operation in case of emergency.
• Do not allow persons or children to remain in the automation ope-
ration area.
10
- MOOVI 30-50 UL CSA Ver. 01
INSTALLATION MANUAL
• Keep radio control or other control devices out of children's reach, in
order to avoid unintentional automation activation.
• The user must avoid any attempt to carry out work or repair on the automa-
tion system, and always request the assistance of qualified personnel.
• Anything which is not expressly provided for in the present instructions,
is not allowed.
• Installation must be carried out using the safety devices and controls
prescribed by the EN 12978 Standard.
INSTALL THE BARRIER ONLY WHEN:
• The operator is appropriate for the construction of the barrier and the
usage Class of the barrier;
• All exposed pinch points are eliminated or guarded
• The barrier is intended for installation only on gates used for vehicles.
Pedestrians must supplied with a separate access opening,
• The barrier must be installed in a location so that enough clearance is
supplied between the gate and adjacent structures when opening and
closing to reduce the risk of entrapment.
FOR GATE OPENERS WITH HOLD-TO-RUN CONTROL:
• The barrier controls must be placed so that the user has full view of the
area when the barrier is moving.
• A sign with the message "WARNING"must be positioned near the controls.
The characters for the writing should be at least 1/4 inch (6.4 mm) high.
The following statement should also be indicated: "Moving Barrier Has
the Potential of Inflicting Injury or Death - Do Not Start Barrier Unless
Path is Clear".
• An automatic closing device (such as a timer, loop sensor, or similare
device) shall not be employed.
• No other activation device shall be connected.
• Controls must be far enough from the barrier so that the user is prevented
fromcoming in contact with the bar while operating the controls. controls
intended to be used to reset an operator after 2 sequential activations
of the entrapment protection device or devices must be located in the
line-of-sight of the bar. Outdoor or easly accesible controls shall have a
security feature to prevent unauthorized use.
• All warnings signs and placards must be installed where visible in the
area of the barrier.
FOR ACTUATORS PROVIDED WITH SENSOR FOR CONTACT-FREE
DETECTION:
• See instructions on the placement of non contact sensor for each type
of application,
• Care shall be exercised to reduce the risk of nuisance tripping, such as
when a vheicle, trips the sensor while the bar is still moving
• One or more non-contact sensor shall be located where the risk of
entrapment or obstruction exist, such as the perimeter reachable by a
barrier.
FOR ACTUATORS PROVIDED WITH CONTACT DETECTION (RUBBER
SKIRT OR SIMILAR):
• A hardwired contact sensor shall be located and its wiring arranged so that
the communication between the sensor and the barrier is not subjected
to mechanical damage.
• A wireless contact sensor such as one that transimts radio frequency (RF)
signals the barrier for entrapment protection functions shall be located
where the transimission of the signals are not obscrtucted or impeded y
building structure, natural landscaping or similar obstruction. A wireless
contact sensor shall function under the intended end-use conditions.
IMPORTANT SAFETY INSTRUCTIONS:
WARNINGS: to reduce the risk of injury or death:
• Read and follow all instructions.
• Never let children operate or play with barrier control. Keep the remote
control away from children.
• Always keep people and objects away from the barrier.NO ONE SHOULD
CROSS THE PATH OF THE MOVING BARRIER.
• Test the barrier montly. The gate MUST reverse on contact with a rigid
object activates the non-contact sensor. After adjusting the force or the
limit of travel, reset the barrier. Failure to adjust and retest the barrier
properly can increase the risk of injury or death.
• Use the emergency realease only when the gate is not moving.
• KEEP GATES PROPERLY MAINTAINED. Read the owners manual.
Have a qualified service person make repairs to gate hardware.
• The entrance is for veichles only. Pedestrians must use separate entran-
ce.
• Save these instructions.