Warnings + General Safety Information - UPPAbaby RumbleSeat Manual Del Usuario

Asiento auxiliar disenado para vista 2015+
Ocultar thumbs Ver también para RumbleSeat:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNINGS + GENERAL SAFETY INFORMATION

WARNING
• NEVER LEAVE CHILD UNATTENDED.
• FAILURE TO FOLLOW THESE WARNINGS AND INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH:
• To avoid serious injury from sliding or falling out, always use complete
5-point harness.
• Child may slip into leg openings and strangle. NEVER use in a reclined
position unless child is secured in 5-point harness system.
• Unit may become unstable if manufacturer's recommended load is
exceeded, or if parcel bag or accessory other than that recommended
by the manufacturer is used or hung from the unit.
• Children and adults should be clear of moving parts while making
stroller adjustments. Damage to fingers or extremities may occur when
opening or closing the frame.
WARNING
2
IMPORTANT! LOAD YOUR FIRST
CHILD INTO THE MAIN SEAT.
• AFTER FIRST CHILD IS SECURED IN
THE MAIN SEAT, PLACE YOUR SECOND
CHILD INTO THE RUMBLESEAT.
• DO NOT place child in the RumbleSeat
without a child in the main seat.
WARNINGS + GENERAL SAFETY INFORMATION
Keep these instructions for future reference.
• Intended for use only with UPPAbaby VISTA model year 2015 and later.
• This seat is suitable for children from 3 months until child is 35 lbs (15.9 kg)
or 36 in (91.4 cm), whichever comes first.
• If loading your child into the RumbleSeat from the top, be careful of recline
handle on main seat.
• DO NOT allow child to stand while in the RumbleSeat.
• DO NOT lean or press on the RumbleSeat with excessive force. Please
follow the maximum weight guidelines.
• Always push the stroller with both hands when using the RumbleSeat.
• Stroller can fold with adapters attached, however, the RumbleSeat must
be removed and the main seat must be facing forward and in an upright
position.
• Before each use, inspect your adapter to make sure the brackets are fully
engaged with the stroller.
• Audible "click" must be heard to confirm that each attachment is
connected properly.
• Always make sure stroller is fully open and locked before use.
• Bumper bar must be attached at all times.
• DO NOT lift the stroller by the bumper bar as it may disengage.
• The brake must be locked while taking the child in or out of the stroller,
and when parked.
• NEVER leave child in the stroller while ascending or descending stairs,
or using an escalator.
• DO NOT make any alterations or modifications to the RumbleSeat with
products not supplied by the manufacturer as this may cause instability
or structural damage not covered under warranty.
This product is designed and manufactured to comply with ASTM F833-15 Standard Consumer Safety
Performance Specification for Carriages and Strollers and is JPMA certified. This product is designed and
manufactured to comply with Canadian standard SOR/2016-167 Carriages and Strollers Regulations.
3

Publicidad

Tabla de contenido
loading

Tabla de contenido