EINHELL CC-PO 1100/2 E Manual De Instrucciones página 27

circumstances.
f) Wear suitable work clothes. Do not wear
loose clothing or jewellery. Keep hair, clo-
thes and gloves away from moving parts.
Loose clothing, jewellery or long hair can get
trapped in moving parts.
g) If vacuuming devices and draining de-
vices can be fi tted, make sure that these
are correctly attached and correctly used.
The use of a dust extraction system can redu-
ce the danger posed by dust.
4. Usage and treatment of the electric tool
a) Do not overload the appliance. Use the
correct tool for your work. You will be able
to work better and more safely within the gi-
ven performance boundaries.
b) Do not use an electric tool with a defec-
tive switch. An electric tool that cannot be
switched on or off is dangerous and must be
repaired.
c) Pull the plug out of the socket and/or
remove the battery before making any ad-
justments to the appliance, changing ac-
cessories or put the appliance down. This
safety measure prevents starting the electric
tool unintentionally.
d) Keep unused electric tools out of the
reach of children. Do not allow people
who are not familiar with the appliance or
who have not read these instructions to
use the appliance. Electric tools are dange-
rous if they are used by inexperienced people.
e) Clean your electric tool carefully. Check
whether moving parts are functioning
properly and not jamming, whether parts
are broken or damaged enough that the
functioning of this electric tool is aff ec-
ted. Damaged parts must be repaired be-
fore using the appliance. Many accidents
are caused by badly maintained electric tools.
f) Keep your cutting tools sharp and clean.
Carefully maintained cutting tools with sharp
cutting edges will jam less and are easier to
control.
g) Make sure to use electric tools, accesso-
ries, spare parts, etc. in accordance with
these instructions. Take the conditions
in your work area and the job to perform
into account. Using electric tools for any
purpose other than the one for which they are
intended can lead to dangerous situations.
Anl_SA_CC_PO_1100_E_SPK8.indb 27 Anl_SA_CC_PO_1100_E_SPK8.indb 27
GB
5. Service
a) Have your electric tool repaired only by
trained personnel and/or the authorized
service agent, using only genuine spare
parts. This will ensure that your electric tool
remains safe to use.
Special safety information
a) This electric tool is designed for use as a
sander and polisher. Obey all the safety inst-
ructions, general instructions, illustrations and
data supplied with the tool. If you fail to obey
the following instructions, you may suff er an
electric shock, fi re and/or serious injuries.
b) This electric tool is not suitable for grinding,
cutting-off or working with wire brushes. Use
of the electric tool in ways it was not intended
could lead to dangerous situations and inju-
ries.
c) Do not use any accessories which have not
been designed and recommended by the
manufacturer specifi cally for this electric tool.
Just because you can attach an accessory to
your electric tool, this does not guarantee that
you can use it safely.
d) The maximum speed of the plug-in tool must
be at least as high as the maximum speed
specifi ed on the electric tool. Accessories
which rotate faster than the maximum speed
may break and be catapulted out of the tool.
e) The external diameter and thickness of the
plug-in tool must comply with the dimension
specifi cations of your electric tool. Plug-in
tools of the wrong size cannot be adequately
screened or checked.
f) Grinding wheels, fl anges, grinding disks or
other accessories must fi t precisely on the
grinding spindle of your electric tool. Plug-in
tools which do not fi t exactly on to the grin-
ding spindle of the electric tool will rotate
irregularly, vibrate a great deal and may result
in you losing control.
g) Do not use damaged plug-in tools. Before
use, check plug-in tools such as grinding/san-
ding wheels for splintering and cracks, grin-
ding/sanding disks for cracks, wear or heavy
wear, and wire brushes for loose or broken
wires. If the electric tool or the plug-in tool is
dropped, check whether it is damaged or use
an undamaged plug-in tool. When you have
checked and fi tted the plug-in tool, make sure
that you and other persons in the vicinity are
not on a level with the rotating plug-in tool and
allow the electric tool to run for one minute at
maximum speed. Damaged plug-in tools will
- 27 -
27.09.2017 08:57:41 27.09.2017 08:57:41