Using Dust Arrester - Hiti CS-200e Manual De Instrucciones

3.2.2 Using dust arrester

Each pack/box of HiTi original consumables should contain a set of dust arrester (with cleaning roller).
If first to use...
a. Take the dust arrester with cleaning roller from the accessory box of printer carton.
b. Remove adhesive film from the cleaning roller, and then put dust arrester into the printer.
If need to change cleaning roller of dust arrester...
Open the cover gently
Put the metal shaft into the
new cleaning roller
Take dust arrester from printer
NEW
used
Remove the used cleaning roller
Assembly the roller and
dust arrester
16
HiTi CS-200e & CS-220e user manual
Remove adhesive film
Place dust arrester back
to the printer