Loading Ink Ribbon; Loading Dust Box - Hiti M610 Manual Del Usuario

Loading Ink Ribbon

1. Set the ink ribbon to the printing unit as
shown below.
2. Tighten the ink ribbon by turning the ink
ribbon supply core.
3. Close the front cover gently
When both the paper and the ink ribbon are
loaded into the printer and the front cover is
closed, the printer will be initialized and few
paper will be ejected automatically.
HiTi M610 User Manual

Loading Dust Box

1. Push the dust box to the printer
2. Please make sure there is no gap between
the dust box and the printer.
OK
3. In case that trim dusts are stacked in the
dust box, make sure to throw them away.
The following cautions are necessary in
transportation of the printer
1. Remove the ink ribbon and paper from the
printer before transporting the printer.
2. Use the original box to transport the printer.
If the box used at the purchase cannot be
used, consult with your distributor and
purchase a new box.
2 - 5
English
×