Inserting The Battery - Toshiba CAMILEO X200 Guía De Usuario

Disposal of used batteries
❖

Inserting the battery

❖
Do not use an impaired or exhausted battery
❖
NOTE
Handling of the battery
❖
❖
❖
Always dispose of used batteries in compliance with all
applicable laws and regulations. Put insulating tape, such as
cellophane tape, on the electrode during transportation to avoid
a possible short circuit, fire or electric shock. Failure to do so
could possibly result in serious injury.
When installing a battery or before moving the product, always
make sure the battery is inserted correctly and securely. If the
battery falls out, while you are carrying the product, you could
be injured or the battery could be damaged.
Never continue to use a battery after its recharging capability has
become impaired, or after the warning message indicating that
the battery power is exhausted has been displayed.
Continued use of an exhausted or impaired battery could result
in the loss of data or damage to the product.
Never attempt to install batteries in reverse polarity.
Make sure the battery is securely installed in the product before
attempting to charge the battery.
Improper installation could generate smoke or fire, or cause the
battery to rupture.
Getting Started
Loading the battery
19