Cardin DKS Serie Manual De Instalación Y Manual Del Usuario página 19

INSTALLING THE DKS1000R INTERFACE BOX IP20
Depending on the type of installation, work out the position in which the interface will be situated remembering
that the site must be:
- indoors (or stored in a waterproof container if installed outdoors)
- a position safe from accidental collision;
- in a position which the technician can easily reach.
Fastening:
• To the wall, distance between centres 75 mm, using two M4 screws and relative rawlplugs (not supplied)
• In a waterproof container using the supplied double-sided adhesive tape
Interface electrical connection
Warning! The receivers must only be powered by a safety power pack.
The use of non-safety power packs could cause damage to the system.
To facilitate the electrical connection the container is fitted
with a slot-in terminal board cover which can be easily
removed using a small screwdriver.
All rights reserved. Unauthorised copying or use of the information contained in this document is punish
19
1