Cardin DKS Serie Manual De Instalación Y Manual Del Usuario página 23

INSTALLING THE TRANSPONDER READER DKSTPT
4
A
11
12
10
13
14
15
• Pass the power supply / signal cable through the
hole "10", bend it slightly "11" and wire it to the
terminal block "12". Replace the terminal block cover
and fasten down using the screws "14". Rotate the
transponder reader, hook it onto the upper part of
the base "15" and rotating it slightly allow it to snap
17
onto the base "16", then fasten the reader using the
16
two screws "17".
23