Cardin DKS Serie Manual De Instalación Y Manual Del Usuario página 27

• Within 13 seconds of confirming the
code press one or more functions A-B-
C-D in sequence (e.g. A-C)
*
• Press " " and the interface will give
confirmation by sounding a 'beep'.
The code was accepted and the functions assigned
If you have inserted an invalid user code the interface
will sound 5 consecutive beeps.
Transponder
• On the interface, move the dips of 'S1' to
CHANNEL
A B C D
'ON' depending on the channel function
ON
you wish to assign to the new transponder
1 2 3 4
tag.
• It is only possible to assign 1 channel
function to a transponder tag.
• Move the tag near to the remote
transponder reader.
• The interface will give confirmation by
sounding a 'beep'.
4. Memorising user codes remotely
Using this procedure (if you possess a master code)
it is possible to add a new keypad / transponder tag
user without directly accessing the interface.
Keypad
• Type the master code into the keypad
and press "
• The remote user code memorisation
procedure will be activated with a time
maximum of 30 seconds.
The keypad will sound a beep and the red
and green leds will light up. The green led
switches off and the function is active.
• Type the new code to memorise into the
keypad (max. 6 digits) and press confirm
*
" ".
• The keypad will sound a two-second long
beep with the green led lit.
The code has been accepted
27
*
".