Ezviz T6 Guia De Inicio Rapido página 7

Adding to Internet Alarm Hub
The Internet Alarm Hub (such as A1) should be purchased separately.
Option 1 (Recommended)
1
Removing the Base
Slide the base according to the arrow on it to remove it from the T6. You
can see the device QR code on the back of T6.
2
Adding T6 to Internet Alarm Hub
- Download and install the EZVIZ app by searching the "EZVIZ" in App
Store (iOS version) and Google Play
- Start the app and register for an EZVIZ user account following the
start-up wizard.
- Log in the EZVIZ app and scan the device QR code to add it to the
Internet Alarm Hub.
Option 2 Adding by Operating the Internet Alarm Hub
- Enable the "Adding Detectors Mode" of your Internet Alarm Hub.
- Take T6 close to the Internet Alarm Hub (within 50cm) and press the button
on the T6, the blue indicator flickers twice indicating the adding signal is
sent.
Alarm Hub
- The Internet Alarm Hub issues a voice prompt of the detector type and
serial No. indicating the detector is added.
Internet
Indicator
(Android version).
TM
3