Installing Detector
1
Pasting the Foam Sticker
Paste the foam sticker to the base of the T6.
If you want to install the T6 to the
foam
sticker.
If you want to install the T6 to
foam sticker.
2
Installing the T6
- You can install the T6 on the door or window, as shown in the following
figures. Paste the base to the desired installation place.
- Slide the T6 to the base and secure it with the base.
metal door or window,
1 mm
other doors or windows,
1 mm
Window
4
use the
3 mm
use
either of the supplied
3 mm
Door
3 mm thick