Summer 03006 Manual Del Usuario página 7

Technical Specifications
Type:
Measuring Range:
Accuracy:
Display:
Acoustic:
Memory:
Backlight:
Operating temperature:
Storage/transport temperature:
Automatic Switch-off:
Battery:
Dimensions:
Weight:
Reference to Standards:
Electromagnetic Compatibility
Please observe the applicable disposal regulations.
If you experience a problem that is not noted in this manual, please do not return the product
to the store. Our Customer Relations Department may have a simple solution to your problem.
Please contact us on +44 (0) 1442 505000.
Type BF applied part
Lot number
Reference number
Manufacturer
Authorised representative in
EC REP
the European Community
Batteries and electronic
instruments must be disposed
of in accordance with the
locally applicable regulations,
not with domestic waste.
Digital Infrared Thermometer
32.0 °C to 42.2 °C (89.6 °F to 108.0 °F)
Laboratory: ±0.2 °C, 35.5 ~ 42.2 °C (±0.4 °F, 95.9 ~ 108.0 °F)
±0.3 °C, 32.0 ~ 35.5°C
Liquid Crystal Display with indicating unit 0.1 °C (0.1 °F)
a. The unit is turned ON and ready for the measurement:
1 short "beep" sound.
b. Complete the measurement: 1 long beep sound (1 sec) if the
reading is less than 99.5 ˚F (37.5 ˚C). 10 short "beep" sounds if the
reading is equal to or greater than 99.5 ˚F (37.5 ˚ C).
c. System error or malfunction: 3 short "beep" sounds.
Auto-Displays the last measured temperature when switched on.
a. The LCD display will be lighted GREEN for 4 seconds when the
unit is turned ON.
b. The LCD display will be lighted GREEN again for 5 seconds when a
measurement is completed with a reading less than 99.5˚F (37.5˚C).
c. The LCD display will be lighted RED for 5 seconds when a
measurement is completed with a reading equal to or higher than
99.5˚F (37.5˚C).
10 °C to 40 °C (50 °F to 104 °F)
-25 ºC to +55 ºC (-13 ºF to 131 ºF)
Approx. 1 minute after last measurement has been taken.
CR2032 BATTERY (X1) - at least 1000 measurements.
162.6mm (L) x 40.1mm (W) x 58.1mm (H)
78.5g
Device Standard: Device corresponds to the requirements of the
standard for infrared thermometers EN 12470-5, ASTM E 1965,
IEC 60601-1, IEC 60601-1-2
Device fulfills the stipulations of the standard IEC 60601-1-2.
Thermometer
manufactured by:
ONBO Electronic
(Shenzhen) Co. Ltd.
China
0044
The stipulations of
EU-Directive 93/42/EEC
for Medical Devices Class
IIa have been fulfilled.
(±0.5 °F, 89.6 ~ 95.9 °F)
Manufactured for:
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
© 2004 Summer Infant, Inc.
Summer Infant Europe, Ltd.
First Floor, North Wing
Focus 31, Cleveland Road
Hemel Hempstead
HP2 7BW UK
+44 (0) 1442 505000
MADE IN CHINA. 08/12