Troy-Bilt Super Bronco Manual Del Propietário página 14

PTO / Blade Engage Knob
Activating the PTO engages power to
the cutting deck or other (separately
available) attachments. Pull outward
on the PTO/Blade Engage knob to
activate it. Push the PTO/ Blade Engage
knob inward to disengage the power
to the cutting deck or other (separately
available) attachments.
NOTE: The PTO/Blade Engage knob
must be in the disengaged (OFF)
position when starting the engine.
Fuel Level Indicator
The Fuel Level Indicator is located on the left side of the
tractor's dash and indicates the amount of fuel in the gas
tank.
14 S 4— c
ection ontrolS and
F
eatureS
Parking Brake/Cruise Control Lever
Located in the center of the tractor's dash
panel below the steering wheel, the Parking
Brake/Cruise Control lever is used to engage
the parking brake and the cruise control Refer
to the Operation section of this manual for
detailed instructions regarding the parking
brake.
NOTE: The parking brake must be set if the
operator leaves the seat with the engine
running or the engine will automatically shut
off.
NOTE: Cruise control can NOT be engaged
at the tractor's fastest ground speed. If the
operator should attempt to do so, the tractor
will automatically decelerate to the fastest
optimal mowing ground speed.
WARNING!
Never leave a running machine
unattended. Always disengage PTO, set parking
brake, stop engine and remove key to prevent
unintended starting.