End Of Program - Gima H100 Instrucciones Para El Uso

During this phase the green HEATING led lights on and off in order to keep temperature constant. After 15
minutes START , HEATING and STERILIZING leds are off and the green STERILIZING
COMPLETE led is on ( 7 ).
If something has beeb wrong during the cycle (lack of electric power, bad working) the green "sterilization"
led indicating the complete sterilization will not light on. It is therefore necessary to repeat the sterilizing
cycle.

END OF PROGRAM

Raise the little lever of the valve vertically to exhaust all the steam
Attention :
!
Raise the lever very carefully in order to avoid being invested by high temperature steam.
Autoclave GIMA H100 automatic
0
START
15'
STERILIZING
COMPLETE
Picture no. 19
0
START
15'
STERILIZING
COMPLETE
Picture no. 20
- 71 -
HEATING STERILIZING
ALARM
POWER
HEATING STERILIZING
ALARM
POWER
(see picture no. 21 of next page)