Dell Precision Workstation 690 Guía De Referencia Rápida página 41

Light Pattern Problem Description
A possible expansion card failure
has occurred.
Routine system activity preceding video
initialization.
The computer is in a normal operating
condition after POST.
NOTE:
they are turned off after the computer
successfully boots to the operating
system.
The diagnostic lights flicker briefly;
Suggested Resolution
1
Determine if a conflict exists by
removing a card (not a graphics card)
and restarting the computer.
2
If the problem persists, reinstall the
card that you removed, remove a
different card, and then restart the
computer.
3
Repeat this process for each card.
If the computer starts normally,
troubleshoot the last card removed
from the computer for resource
conflicts (see "Resolving Software
and Hardware Incompatibilities"
on page 30).
4
If the problem persists, contact Dell.
Watch your monitor for on-screen
messages.
None.
Quick Reference Guide
41