OPERATION
Clock and Timer
@
The CLOCK
and TIMER are set by
using the touch pads. The TIMER
will not control any oven operation.
After releasing
the arrow pad, the
Timer Indicator
Light and colon will
blink three to five times, then the
timer will start the countdown.
The
Timer Indicator
Light will remain on
until countdown
reaches "0".
When the timer has started the
countdown,
you may press the
CLOCK
pad to return to the current
time of day.
At the end of the countdown
the
control will beep and the Timer
Indicator
Light wil! flash. Press
the TIMER ON/OFF pad.
1. Press the CLOCK
pad
twice to make display flash.
(_2.
Press the HOUR/MIN.
LIP or
DOWN pads to set the time
of day. The colon will flash
while you set the time.
The clock will automatically
start
keeping time within one minute or
you may press the CLOCK
pad for
immediate
start.
If you have selected
an amount of
time, but decide
to change
it:
If the countdown
is showing
in the
display,
press the HOUR/MIN.
UP
or DOWN arrow pad. Select the
desired
time.
If the time of .day clock or
temperature
_s showing
in the
display, press the TIMER ON/OFF
pad. Then, press either the
HOUR/MIN.
UP or DOWN arrow
pad. Select the desired
time.
The TIMER is only a minute timer.
It will not control oven operations.
The maximum
time you may set is
11 hours and 59 minutes.
Press the TII_JIER ON/OFF
pad. "0:00" and the Timer
Indicator
Light will flash.
(_2.
Press the HOUR/MIN.
UP
or DOWN arrow pads to set
the time you prefer to use.
The colon will flash while
you set the time.
If you wish to cancel the TIMER,
press the TIMER ON/OFF pad once.
If the countdown
is not showing,
press the TIMER ON/OFF pad twice.
12