Samson Expedition excape + Manual Del Usuario página 6

Escape+ Controls and Connections
1. MIC INPUT - Use this 1/4" input
to connect a microphone.
2. XPD WIRELESS Input - Connect
a Samson XPD digital wireless
USB receiver to this input.
The wireless receiver gets its
power from the Escape+, so
no additional power supply is
needed.
3. MIC VOLUME - Used to control the
level of the microphone and XPD
Wireless inputs.
4. AUX INPUT - Connect a line level
device using a 1/8" (3.5mm)
audio cable.
5. Pairing Button - Press this button
to enable discoverable mode
to pair with a Bluetooth audio
device.
6. Pairing Indicator - Displays the
Bluetooth status of the Expedition
Escape+ system.
7. MASTER VOL - Used to control
the overall level of the speaker
system.
8. POWER Switch - Switches on the
main power.
9. POWER Indicator - Lights green
when the power switch is in the
ON position.
10. Battery Level Indicator - Displays
the status of the battery charge
level. Indicator lights red while
charging, and turns green when
the battery is fully charged.
11. AC INPUT - Connect the supplied
power cord here.
6
3
2
1
7
6
5
4
9
10
8
11