Installation Requirements; Tools And Parts - Whirlpool 2DLSQ7533JQ5 Instrucciones Para La Instalación

Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Tools needed for connecting the drain hose and water
inlet hoses:
Pliers that open to
3.95 cm (1⁹⁄₁₆")
Flat-blade screwdriver
Parts supplied:
A
E
A. Water inlet hose (2)
B. Drain hose form
C. Drain hose extension
D. Drain hose coupling
Tools needed for securing the drain hose and leveling
the washer:
Adjustable or open end
wrench 14 mm (⁹⁄₁₆")
Level
Parts supplied:
A
A. Beaded tie strap
B. Front leveling feet with nuts (2)
2

INSTALLATION REQUIREMENTS

Flashlight (optional)
B
C
G H
F
E. Large flat washer (4)
F. Small flat washer (2)
G. Inlet hose adapter
H. Hose clamp (2)
Wood block
Ruler or measuring tape
B

Tools and Parts

Alternate Parts
Your installation may require additional parts. For information on
ordering, please refer to the toll-free phone numbers on the front
page of the Washer User Instructions.
If You Have:
Laundry tub or
standpipe taller
than 2.4 m (96")
Overhead sewer
D
Floor drain
Water faucets
beyond reach of fill
hoses
Drain hose too
short
Lint clogged drain
You Will Need to Buy:
Sump pump system (if not already
available)
Standard 76 L (20 gal.) 99 cm (39") tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
2 longer water fill hoses:
1.8 m (6 ft) Part Number 76314,
3.0 m (10 ft) Part Number 350008
Drain hose kit, Part Number 280131
Drain protector, Part Number 367031