Care And Cleaning - vitapur VWD1076BLST Manual De Uso Y Cuidado

3. DISPENSING HOT WATER
Important:
(low water level sensor) that controls activation/operation of the Kettle Feature
hot water tank heating system. If no water is present and/or low water levels are
detected inside the internal water reservoir, activation/operation of the Kettle
Feature hot water heating system is not possible. Likewise, if the hot water heating
system is operational and water is being drawn simultaneously causing internal
water levels to drop below the established minimum level set point, hot water tank
operation is automatically suspended. To reactivate the hot water heating system,
you must replenish your water supply and activate the heating function.
of the cold water system is not affected by this safety feature.
WARNING: THE LOWER FRONT PANEL (H) MUST BE INSTALLED
OTHERWISE HOT WATER HEATING IS NOT POSSIBLE.
1
WARNING: Hot water temperatures can reach 94C/201F and produce severe scalding, never let
children dispense hot water without direct adult supervision.

Care and Cleaning

CLEANING THE OUTSIDE OF THE WATER DISPENSER
CLEANING THE DRIP TRAY
1
CLEANING THE CONDENSER
Your Vitapur® water dispenser is designed with a special safety feature
2
2
3
3m
3
SOAPY
WATER
4
SOAPY
WATER
Operation