Care And Cleaning - vitapur VWD1076BLST Guía De Uso Y Cuidado

3. DISPENSING HOT WATER
Important:
feature (low water level sensor) that controls activation/operation of the Kettle
Feature hot water tank heating system. If no water is present and/or low water
levels are detected inside the internal water reservoir, activation/operation of the
Kettle Feature hot water heating system is not possible. Likewise, if the hot water
heating system is operational and water is being drawn simultaneously causing
internal water levels to drop below the established minimum level set point, hot
water tank operation is automatically suspended. To reactivate the hot water
heating system, you must replenish your water supply and activate the heating
function.
1
WARNING: Hot water temperatures can reach 94C/201F and produce severe scalding, never let
children dispense water without direct adult supervision.

Care and Cleaning

CLEANING THE OUTSIDE OF THE WATER DISPENSER
CLEANING THE DRIP TRAY
1
CLEANING THE CONDENSER
Your Vitapur® water dispenser is designed with a special safety
Operation of the cold water system is not affected by this safety feature.
2
2
WATER
SOAP
3
3m
4
WATER
SOAP