Large Capacity Debris Bag - Hayward VIPER 5500 Guia Del Usuario

Large Capacity Debris Bag

Attaching Debris Bag
(Part B, page 4)
1. Place forward edge of Bag Holder under tab to right of
Vacuum Tube.
2. With Bag Holder flat on Deck, slide Bag Holder to the left
until it locks in place.
Removing Debris Bag
1. Push down Locking Tab on Deck.
2. Slide Bag Holder to right.
Cleaning Debris Bag
1. Hold Bag over trash can or wherever debris is to
be placed.
2. Slide Float Closure off of bag
3. Hold open edges apart and shake debris from bag.
4. Slide Float Closure onto bag.
Sand (dense debris)
Always empty the Viper bag when sand (or heavy
debris) fills the bag up to the "Empty Sand Line". T h e
Viper will continue to operate with 1 cup of sand and the
remainder of its bag filled with debris.
Note: Pools with excessive amounts of sand should be
manually vacuumed before installing the Viper.
a)
Slide Float Closure off of Bag
10
Rear Deck of Cleaner
Attaching / Removing Debris Bag
b)
Hold Edges Apart
Empty Sand Line
(blue line)
Empty Sand Line
(blue line)
Use Only Genuine Hayward Replacement Parts.