General Specifications - Klein Tools HVNCVT1 Manual De Instrucciones

EnGLISH
The Dual-Range High-Voltage Non-Contact Tester (HVNCVT1) checks for the
presence of AC voltage without making any disconnection in cables, wall sockets,
fuses, circuit breakers, junction boxes, etc. No current flow is needed for correct
operation. The tester warns against dangerous voltage from low to high voltage
applications up to 132kV without contacting the energized conductor. The low-
range setting should be used for detecting 50V AC to 1.5kV AC. It may be used as
a hand-held device ONLY when checking for low voltage. The high-range setting
should be used for detecting 1.5kV AC to 132kV AC. It should ONLY be used with a
hot stick when checking for high voltage.
Always follow approved work safety practices and clearances per OSHA Sub-parts
R & V and all company work rules. For Minimum Approach Distances (MAD), see
OSHA Tables R-6 and R-7 (pages 8 & 9) in this manual.
• Operating temperature: 32° to 122°F (0° to 50°C) @ 85% relative humidity
• Storage temperature: 14° to 122°F (-10° to 50°C) @ 85% relative humidity
• Dimensions: Tester: 13" x 3.15" x 2.64" (330 x 80 x 67mm)
• Weight: 8 oz. (227 g)
• power Source: One 9V battery
• power Consumption: Off: Less than 5uA
Specifications subject to change.

GEnERaL SpECIfICatIOnS

Case: 14" x 8" x 3.5" (356 x 203 x 89 mm)
Low range mode: (50V to 1.5kV AC) Less than 40mA
High range mode: (1.5kV to 132kV AC) Less than 40mA
SYMBOLS
Warning or Caution
Risk of Electrical Shock
Double Insulated
2