KR_WINE_DISPENSER_NAFTA_NC00119132_NC00119132 18/07/13 08:37 Page15
The pump noise is normal and is indicative that the unit is functioning properly while
dispensing wine.
Release the wine dispensing lever. The lever will return to its original resting position
automatically.
- Do not immediately pull back the glass as there may be wine dripping after the
lever is released. Please wait for 5 seconds before pulling back the glass after
releasing the dispensing lever.
The machine is equipped with a dedicated wine aerating feature that allows for the wine to
be aerated prior to being dispensed.
This process will automatically reproduce the manual aeration obtained while using a decanter.
Aerating the wine will maximize the wine exposure to surrounding air, allowing the wine's
aromas to open up thus enhancing the overall tasting experience.
To aerate the wine:
Turn the aeration handle to the "ON" position before dispensing the wine
Follow the wine dispensing instructions above to pour a glass of wine.
During the aeration process, it is normal to see some air bubbles in the wine flow which
demonstrate proper wine aeration.
To stop the wine aeration process:
Turn the aeration handle to the "OFF" position before dispensing the wine.
The machine features 2 wine chambers, allowing to have two different wine bottles opened
at the same time.
If using one chamber only, the empty chamber can be switched off by pressing the chamber
main switch off (13).
To switch the chamber on again, press the main chamber switch (13).
A white light inside the main chamber switch indicates whether the chamber is turned ON or
OFF.
Each wine chamber is equipped with 2 LED lights to help you identify the bottle inside the
chamber.
To turn on the light in the chambers :
• Press the light button to switch the light on.
To turn off the light in the chambers :
• Press the light button to switch off the light.
AERATING THE WINE
TURNING ON/OFF ONE CHAMBER
LIGHT
(12).
15