EGO Power+ LB6000 Manual Del Operador página 16

4. You may shorten or lengthen the tube
length according to your preference
by locking the middle tube into
different lock positions (Fig. 7).
5. Attach the tube assembly onto the
blower housing in the same way
(Fig. 8 & 9).
6. To remove the tube assembly from
the blower housing or to separate the
two tubes, first turn the tube in the
unlocking direction to disengage the
latch and then pull the tube straight
outward.
16
56V-VOLT LITHIUM-ION CORDLESS BACKPACK BLOWER — LB6000
7
Locked in the second lock position
Locked in the first lock position
8
2
1
9