EGO Power+ LB6000 Manual Del Operador página 24

STARTING/STOPPING THE
BLOWER (Fig. 23)
1. To start the blower, press down on
the lock-off lever and hold it, then
depress the trigger. The blower will
begin to run.
2. To stop the blower, release the
trigger.
ADJUSTING THE AIR SPEED
(Fig. 23)
The blower is equipped with stepless speed regulation to control air speed.
1. To increase the air speed, pull the variable-speed lever downward when the
blower runs; to reduce the air speed, push the knob upward.
2. To boost the air speed at any setting, press the boost button to increase the air
speed to the maximum. The blower will resume the previously selected speed
when this button is released.
24
56V-VOLT LITHIUM-ION CORDLESS BACKPACK BLOWER — LB6000
23
Variable-Speed Lever
Trigger
Boost Button
Lock-off Lever