Safety Advice - testo 922 Manual De Instrucciones

1.

Safety advice

This chapter gives the general rules which must be
followed and observed if the product is to be handled
safely.
Avoid personal injury/damage to equipment
Do not use the instrument and probes to measure on or
near live parts.
Never store the instrument/probes together with
solvents and do not use any dessicants.
Product safety/preserving warranty claims
Operate the instrument only within the parameters
specified in the Technical data.
Always use the instrument properly and for its intended
purpose. Do not use force.
Do not expose handles and feed lines to temperatures in
excess of 70 °C unless they are expressly permitted for
higher temperatures.
Temperatures given on probes/sensors relate only to the
measuring range of the sensors.
Open the instrument only when this is expressly
described in the documentation for maintenance and
repair purposes.
Carry out only the maintenance and repair work that is
described in the documentation. Follow the prescribed
steps when doing so. For safety reasons, use only
original spare parts from Testo.
Ensure correct disposal
Take faulty rechargeable batteries/spent batteries to the
collection points provided for them.
Send the product back to Testo at the end of its useful
life. We will ensure that it is disposed of in an
environmentally friendly manner.
1. Safety advice 23