General Information; Product Description; Safety Information - testo 830-T1 Manual De Instrucciones

1. General Information

Please read this document through carefully and familiarise
yourself with the operation of the product before putting it to use.
Keep this documentation to hand so that you can refer to it when
necessary.

2. Product Description

Display
Infrared
measurement
On/Off switch
Contact
measurement

3. Safety Information

Avoid electrical hazards:
Contact measurement: Do not measure on or near live parts.
Infrared measurement: Please adhere to the required safe
distance when measuring on live parts.
Preserving product safety/warranty claims:
Operate the instrument properly and according to its intended
purpose and within the parameters specified. Do not use
force.
Do not expose to electromagnetic radiation (e.g. microwaves,
induction heating systems), static charge, heat or extreme
fluctuations in temperature.
Do not store together with solvents (e.g. acetone).
Open the instrument only when this is expressly described in
the documentation for maintenance purposes.
Laser radiation!
Do not look into laser beam.
Infrared
sensor,
laser
Measurement
button:
infrared
measurement
Battery compartment
Probe socket
(testo 830-T2 only)
Accessories
Name Item no.
Water-tight
immersion/penetration
probe,
-60 to +400°C/
-76 to +752°F 0602 1293
Quick-reaction
surface probe,
-60 to +300°C/
-76 to +572°F 0602 0393
Robust air probe,
-60 to +400°C/
-76 to +752°F 0602 1793
Leather protection
sleeve 0516 8302
Emissivity adhesive tape
ε=0.95
0554 0051
9