Tools and Materials
5/8"OD Copper
Tubing (1/2" Nominal)
Before You Begin
WARNING: Risk of personal injury. Do not install the bath
faucet in an area where it may inadvertently be used for
support by the bather.
CAUTION: Risk of property damage. Select a cutting tool
appropriate for the deck/rim surface type. Refer to the
surface manufacturer's instructions for the proper cutting
procedures.
IMPORTANT! Install to a finished deck only. Cannot be installed
on a rough deck.
IMPORTANT! Do not install the spout to a bath valve other than
the one included. The handles are not compatible with other valves.
IMPORTANT! Choose only handles that are listed on the
specification sheet for this product. Other handles will not install on
the valves correctly.
Observe all local plumbing and building codes.
Shut off the main water supply.
Protect the surface of the bath deck/rim during the installation.
Handles must be purchased separately.
1205434-2-A
Plus:
• 3" (76 mm) Maximum
Reinforcing Material
Plumbers Putty
Solder
Hacksaw or Tubing Cutter
Hex Wrench
5/32" & 5/64"
2
Rags
Kohler Co.