Lighting A Surface Burner - GE JEG3002BBE Manual De Uso Y Cuidado

3.2 Lighting a surface burner

BEFORE LIGHTING THE BURNERS REMOVE ALL PACKING MATE-
RIAL THAT PROTECT THE RANGE.
OPERATION OF ALL BURNERS AND OVEN MUST BE CHECKED
AFTER THE RANGE AND GAS CONNECTIONS HAVE BEEN PROP-
ERLY VERIFIED AGAINST LEAKS.
WHEN THE BURNER LIGHTS FOR THE FIRST TIME, FLAME WILL
BE ALMOST HORIZONTAL AND WILL LIGHTLY RAISE ABOVE THE
BURNER, IN ADDITION YOU WILL HEAR A HISSING SOUND FOR
30 TO 60 SECONDS.
AS YOU DECREASE THE BURNER FLAME, LOOK AT THE FLAME,
NOT THE KNOB.
INCORRECT CORRECT
Yellow tips Blue tips
A PROPERLY ADJUSTED BURNER IS THE ONE THAT EXHIBITS A
BLUISH FLAME RATHER THAN A YELLOWISH ONE.
FOR YOUR SAFETY DO NOT STORE GASOLINE OR OTHER FLAM-
MABLE LIQUIDS IN THE VICINITY OR INTERIOR OF THIS RANGE.
DO NOT USE OVEN FOR A STORAGE AREA, ITEMS STORED IN IT
CAN IGNITE.
DO NOT TRY TO REPAIR OR REPLACE ANY PART OF YOUR
RANGE, UNLESS SPECIFIED IN THIS MANUAL.
31