Colour Macros - Cameo STUDIO PAR 64 LED CAN Manual De Usuario

COLOUR MACROS

In this mode, one of the 6 basic colours of the projector or one of the 9
different mixed colours can be selected as a preset.
Press the MODE button until "MACRO" appears in the upper line of the
display. Now press ENTER and then select one of the 15 colour presets
using the UP and DOWN buttons. Confirm with ENTER.
MACRO 01 = red
MACRO 02 = green
MACRO 03 = blue
MACRO 04 = white
MACRO 05 = amber
MACRO 06 = UV / black light
MACRO 07 = yellow
MACRO 08 = cyan
COLOUR CHANGE
In the colour change mode (Jumping Mode), 12 different colours alternate
in rapid succession (red, green, blue, white, amber, yellow, cyan, lavender,
pink, light green, magenta, turquoise, orange). The speed of the program is
adjustable separately and a stroboscope effect can also be activated.
Press the MODE button until "JUMPING" appears in the upper line of the
display. Now, press ENTER until the cursor appears in the lower line of the
display, and then select the rate (SPEED) using the UP and DOWN buttons,
with the colours alternating from 00 to 99.
Confirm with ENTER. The indicator in the bottom line of the display changes
to "FLASH:xx". At the same time, the cursor will appear in the bottom
line and you can activate the stroboscope effect using the UP and DOWN
buttons and adjust the flash frequency from 00 to 99 (FLASH:00 = strobe
deactivated, FLASH: 01 = approx. 1 Hz, FLASH: 99 = approx. 20 Hz).
Confirm with ENTER.
COLOUR CHANGE
Rate SPEED:00 - SPEED:99
STROBOSCOPE
Flash frequency FLASH:00 - FLASH:99
MACRO 09 = lavender
MACRO 10 = light green
MACRO 11 = magenta
MACRO 12 = turquoise
MACRO 13 = orange
MACRO 14 = cool white
MACRO 15 = warm white
OPERATION:
9