Peavey IMPULSE 500P SUB Guía De Operación página 10

This powered subwoofer system is comprised of a 600W dynamic peak power amplifier
driving a 15" Black Widow ® woofer (1568) with a Kevlar ™ impregnated cone.
Balanced inputs provided to the preamp/EQ electronics are one 1/4" RTS phone jack, one
male XLR and one combo female XLR and 1/4" RTS phone jack, all connected in parallel.
The power amplifier providing the amplification is a low-distortion unit providing 300W RMS
into the nominal 8 ohm load of the woofer. The amplifier was selected for its reliability and
™
superb bass punch. The amplifier features our patented DDT compression, which virtually
eliminates audible power amplifier clipping.
Multiple molded-in handles provide ease of transport, while multiple mounting points (top and
bottom) for the Peavey Versamount ™ 70 and a molded-in stand adapter provide for maximum
utility.
Armor All ® is a registered trademark of The Clorox Company.
WD-40 ® is a registered trademark of WD-40 Company.
Kevlar ® is a registered trademark of DuPont.
10