Displays - monolith EXTRA Manual Del Usuario

DISPLAY
OFF
Generator o
START
The start-up phase is in progress
PELLET FEEDING
Continuous pellet feeding is in progress during the ignition phase
IGNITION
The ignition phase is in progress
PREPARATION
The preparation phase is in progress
WORK
The normal work phase is in progress
MODULATION
The generator is working at minimum
BURN POT CLEANING
Automatic burn pot cleaning is in progress
FINAL CLEANING
The nal cleaning is in progress
STAND BY
Generator o waiting for re-ignition due to an external thermostat
A new ignition is attempted when the generator has just been switched o . When the generator switches o , one must wait for
WAITING
the complete shutdown of the fumes motor, then clean the burn pot. The generator can only be re-ignited when these operations
COOLING
have been performed.
*T AMB Display the ambient temperature (in models with this function)
WAITING
The generator is cooling after a power cut.
BLACK OUT
Once cooling is completed it will re-start automatically
AUTO BLOW
The automatic blow is active
When this message appears, contact the technician authorised to perform routine maintenance on the device. If the cleaning is
SERVICE
not performed, the message will appear at every start-up but without interrupting the normal operation of the stove.

DISPLAYS

REASON
ENGLISH 81