Bushnell GOLF HYBRID Manual Del Usaurio página 5

USING PLAY GOLF MODE
As you might expect, you will spend most of your time in "PLAY GOLF" mode when using the Hybrid's GPS rangefinder section.
1. Make sure you are outdoors, with an unobstructed view of the sky. Press and hold the GOLF button (1) until the GPS display powers on.
2. With PLAY GOLF highlighted on the display (6), press the SELECT button (5). The GPS display will show "SEARCHING" as the Hybrid looks for multiple
available GPS satellite signals and locks onto them. Once locked (note that this can take several minutes the first time you use the Hybrid, but will be faster
when used in the same general area in the future), you'll see a list of course names.
3. Use the UP/DOWN buttons to select (highlight) the course you want to play from the list of nearby courses (closest course at top of list), then press SELECT.
4. The display then shows: Current hole # (at upper left), Par for the hole (upper right), and distances to the center (large number at top center), front (lower left)
and back (lower right) of green. Press UP or DOWN buttons to manually advance to the next hole (useful for "shotgun" starts), or go back to the previous hole.
5. From this main PLAY GOLF screen, press SELECT again to view distances to up to 4 Hazard callouts per hole (varies depending on the number of significant
hazards located near the currently selected hole on this course). See "Hazard Glossary" for a list of all abbreviations used to designate various hazards.
6. From the Hazards screen, press the SELECT button to display the ROUND INFO screen. Here you can view the elapsed TIME OF PLAY or DISTANCE.
7. Press SELECT once again to return to the main PLAY GOLF screen.
8. To use the SHOT DISTANCE feature, press the GOLF (power) button (1) while at the tee (this is your start "point A")-then as you walk towards your ball, the
display will update to indicate distance from point A to your current location. This is useful to measure the length of your shot. Press SHOT again to set a new
starting point (reset distance to "0").
USING THE PLAY GOLF MENU
1. From the main PLAY GOLF screen, press the MENU button (2) to view the PLAY GOLF MENU.
2. Select item from menu (as listed below) using the UP or DOWN button to highlight it, then press the SELECT button.
3. If multiple options are available for a setting, use UP/DOWN to highlight your choice, then press SELECT.
PLAY GOLF MENU ITEMS
• RESUME: from any screen, returns to the main PLAY GOLF screen, showing current hole and distances based on your current position on the course.
• BATTERY*: view battery condition (charge %). (*also provided in the SET UP menu-see "Using The Set Up Menu")
• NEW COURSE: allows you to select another golf course from the list.
• EXIT ROUND: stops GPS course tracking, ends current game.
BLUETOOTH
The Hybrid can connect to the BUSHNELL GOLF smartphone app via Bluetooth. Once connected the app can be used to configure the Hybrid and wirelessly
update the Hybrid's internal golf course database. The BUSHNELL GOLF app can be obtained from the Apple Store and Google Play store for iPhone and Android
devices, respectively. Download and install the app on your mobile device. Go to the mobile devices' settings page to turn on Bluetooth, then launch the
BUSHNELL GOLF app. To connect your Hybrid to the smartphone app follow the steps below:
1. On your smartphone, make sure you have Bluetooth turned on.
2. On your Hybrid, use the UP/DOWN buttons to highlight BLUETOOTH from the Main Menu display, then press SELECT.
3. Select "ON" to turn Bluetooth on (use UP/DOWN buttons to highlight "ON" , then press SELECT).
4. Your Hybrid will then give you a code. Enter that code into the smartphone app when requested.
5. Once paired correctly, your smartphone app will display a confirmation. The Hybrid is now paired with your smartphone.
USING THE SET UP MENU
1. Highlight SET UP from the Main Menu screen (if you are in PLAY GOLF mode, press MENU and select EXIT ROUND to go to the Main Menu) and
press SELECT.
2. Select an item from the SET UP menu using the UP or DOWN button to highlight it, then press the SELECT button.
3. If multiple options are available for a setting, use UP/DOWN to highlight your choice, then press SELECT.
4. A solid checkbox to the left of a setting indicates the current setting (to change it, highlight a different setting and press SELECT).
5. Press the MENU button (2) to return to the SET UP menu screen.
SET UP MENU ITEMS
• YDS/MTR: press SELECT. The solid (filled in) checkbox indicates the current setting (default=YDS). To change how distances are displayed, highlight YARDS
or METERS, press SELECT. This sets the unit display preference for both GPS and Laser sections of the Hybrid.
• AUTO OFF: press SELECT. Solid checkbox indicates current setting. Use UP/DOWN buttons and press SELECT to change the setting. DISABLED (default setting)=unit
will stay powered on until user manually powers off by holding PWR button. 1.5 HOUR to 9 HOUR=unit will automatically power off after the selected time period if no
buttons have been pressed (or if unit has not auto advanced to next hole as you walk the course).
NOTE: selecting an AUTO OFF time such as "8 HOUR" can help avoid running down the battery charge if you forget to power off after a round-but there
is the possibility of losing GPS satellite contact, along with all data generated since your start of play if you select a time shorter than it takes to play
your round.
• BACKLIGHT: Select ON to turn on the display backlight. The display will remain backlit for about 10 seconds, then go out until any button is pressed.
• BATTERY*: press SELECT button to see battery condition (charge %). (*also provided in the PLAY GOLF menu)
5