Klarfit Ultimate Gym 9000 Manual Del Usuario página 41

EN
7
Attach the Leg Press Seat Support Frame (22) to the Leg Press Base Frame (2), using one M10X70mm Hex Bolts (100), two M10 Washers (112)
and one M10 Nylon Nut (117).
Attach the Leg Press Seat Frame (21) to the Leg Press Lower Support Frame (19) and Leg Press Seat Support Frame (22), using three M10X70mm
Hex Bolts (100), six M10 Washers (112) and three M10 Nylon Nuts (117).
Attach the Leg Press Hand Bar (28) to the Leg Press Seat Frame (21), using two M10X70mm Hex Bolts (100), four M10 Washers (112) and two
M10 Nylon Nuts (117).
41