1-3. Individual Component Installation
1) INSTALLING STANDARD CAMERA (SSC-12C)
Caution to install SSC-12C outdoors
1. SSC-12C is designed to be protected from the water drops which are falling on the
upper side of camera in a range of 15°.
(Dust-water protection level : IP42)
Therefore, be sure to install it in a location which is fit in above condition when you
install it outdoor.
SSC-12C camera can be attached to the wall, ceiling or shelf using the camera
mount bracket (SBR-110).
Choose an installation site that can sufficiently support the weight of the equipments
G
to be installed.
Attach the camera mount bracket to the wall or ceiling using the supplied three screws
G
(M4 X L15).
Adjust the camera to target the video location and tighten the bracket handle on the
G
camera mount bracket.
4 ✕ 15 sized
screws
wall or ceiling
10