Using The Mynutriscale® Food Scale; Weighing Mode - bewell connect Visiomed MyNutriScale BW-SCF5 Manual Del Usuario

3-2. USING THE MYNUTRISCALE® FOOD SCALE
2
1. Display screen
2. Bluetooth
3. UNIT button
4. On/Off - Tare button
Overload warning : Immediately remove the items placed on the food scale if 0-ld appears on
the screen. Irreversible damage could be caused to the device.
Choosing the unit of weight
Briefly press the "unit" button to change the unit of weight (G - oz - fl. Oz - lb oz - ml - g).

Weighing mode

Press the « On/Off-TARE » button on the food scale. It lights up. The screen displays "- - - -" then the
weight of the food being weighed. The numbers flash, then stabilize and remain solid.
To set the food scale's tare weight, place your empty dish (plate, bowl, salad bowl, etc.) on it then
press « On/Off-TARE ». The weight of your dish will therefore not be taken into account. The screen
displaying "0 g" flashes. Once this screen has stopped flashing, you can place your food on the
scale to weigh it.
BewellConnect - BW-SCF5 - User Manual - 022017v1
MyScale
UNIT
TARE
4 1 3
11