LOADING DISHES
Using the upper basket
The upper basket is provided with
mobile racks hooked to the sides of the
basket, which can be regulated into 4
positions.
In the lowered position (A-A1) the racks
may be used for such items as: tea and
coffee cups, kitchen knives and ladles.
Also glasses with stems may be safely
hung on the ends of the racks.
A
In the upright position (B-B1) the racks
allow you to load dinner plates and soup
plates.
Plates
vertically with the underside of the plate
towards the back of the dishwasher with
a space between each plate to allow
water to pass freely.
B
It is advisable to load large plates
(approx. 26 or more cm) slightly tilted
towards the rear to facilitate introduction
of the basket into the machine.
Salad bowls and plastic bowls may also
be loaded on the upper basket. It is
advisable to block these in place so that
the jets of water do not make them
overturn.
The upper basket has been designed to
offer maximum flexibility in use and can
be loaded with up to 24 plates on two
rows, up to 30 glasses on five rows or a
mixed load.
A1
should
be
loaded
B1
A standard daily load is represented in
figs. 1, 2 and 3.
Upper basket (fig. 1)
A = soup plates
B = dinner plates
C = dessert plates
D = saucers
E = cups
F = glasses
1
A
Upper basket (fig. 2)
A = soup plates
B = dinner plates
C = dessert plates
D = saucers
E = cups
F = glasses with stems
G = glass
H = cutlery basket
2
A
H
67
E
C
B
D
F
B
C
F
D
E
F
G