Sorting Loads; Fabric Care Labels; Loading The Dryer - Kenmore Elite Manual De Uso Y Cuidado

Secador con vapor
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HOW TO USE
WARNING:
including the Important Safety Instructions, before operating this dryer.

SORTING LOADS

Fabric Care Labels
Most articles of clothing feature fabric care labels that
include instructions for proper care.
Tumble
dry
Normal
Dry
Gentle/
Do not
delicate
tumble dry
Heat
setting
High
Medium
Group Similar Items
For best results, sort clothes into loads that can be dried
with the same drying cycle.
Different fabrics have different care requirements, and
some fabrics will dry more quickly than others. For best
fabric care results, always dry fabrics with similar care
requirements together.
To reduce the risk of fire, electric shock, or injury to persons, read this entire manual,
Permanent Press/
wrinkle resistant
Do not dry
(used with do
not wash)
Low
No heat/air

LOADING THE DRYER

WARNING:
fire, electric shock, or injury to persons when using
this appliance, follow basic precautions, including the
following:
• Check all pockets to make sure that they are empty.
Items such as clips, pens, coins, and keys can damage
both your dryer and your clothes. Flammable objects
such as lighters or matches could ignite, causing a fire.
Failure to do so can result in fire, explosion, or death.
• Never dry clothes that have been exposed to oil,
gasoline, or other flammable substances. Washing
clothes will not completely remove oil residues. Failure
to obey this warning can result in fire, explosion,
or death.
Loading Tips
• Combine large and small items in the same load.
• Damp clothes will expand as they dry. Do not overload
the dryer; clothes require room to tumble and
dry properly.
• Close zippers, hooks, and drawstrings to prevent these
items from snagging or tangling on other clothes.
CHECK THE LINT FILTER BEFORE EVERY LOAD
Every time the dryer is turned on, the CHECK FILTER
light will blink as a reminder to make sure the filter is
clean. Always make sure the lint filter is clean before
starting a new load; a clogged lint filter will increase
drying times. To clean, pull the lint filter straight up and
roll any lint off the filter with your fingers. Do not rinse
or wash the filter to remove lint. Push the lint filter firmly
back into place (refer to page 28).
Always ensure the lint filter is properly installed before
running the dryer. Running the dryer with a loose or
missing lint filter may damage the dryer and articles in
the dryer.
Lint Filter
22
To reduce the risk of

Hide quick links:

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

796.8128796.9128796.8118796.9118

Tabla de contenido