Cycle Modifier Buttons; Timed Dry - Kenmore Elite Manual De Uso Y Cuidado

HOW TO USE

CYCLE MODIFIER BUTTONS

Each cycle has default settings that are selected
automatically. You may also customize these settings
using the cycle modifier buttons.
AUTO DRY cycles are designed to properly care for
specific fabrics and loads. As a result, not all settings are
available for each cycle selection (refer to pages 20
and 21).
TIMED DRY cycles have default settings, but you may
also customize the temperature setting and add options.
Settings are not limited in most timed dry cycles. Use
care when setting options and modifiers for these cycles
to prevent damage to your clothing.
A
TEMP CONTROL
Adjusts the temperature setting from LOW to
HIGH. This allows precise care of your fabrics
and garments. Press the TEMP CONTROL button
repeatedly to scroll through available settings.
Temperature setting is not adjustable in AUTO DRY
cycles.
B
DRY LEVEL
Sets the level of dryness for the selected AUTO DRY
cycle. Press the DRY LEVEL button repeatedly to
scroll through available settings. Use this button to
adjust the dryness of the articles in the load to
your preference.
• This option is not available with TIMED DRY cycles.
• The dryer will automatically adjust the cycle time.
Selecting EXTRA DRY or MORE DRY will increase
the cycle time and dry level, while LESS DRY or
DAMP DRY will decrease the cycle time and
dry level.
• Use a LESS DRY or DAMP DRY setting for items
that you wish to iron or hang for final drying.
A B
NOTE: To protect your garments, not every dry level,
temperature, or option is available with every cycle
(refer to pages 20 and 21).
C
C

TIMED DRY

Allows you to manually select the drying time in
10-minute increments. Use this cycle for small loads
or to remove wrinkles. Use the MORE TIME/LESS
TIME buttons to increase or decrease the selected
drying time in 1-minute increments. Press and hold
the MORE TIME or LESS TIME buttons to rapidly
change the time.
D
CHIME
Adjusts the volume of the chime or turns off the
chime. Press the button repeatedly until the desired
volume setting is illuminated.
24
D