Sony HDR-TD10 Guía De Operaciónes página 26

To display items on the LCD screen again
Touch anywhere on the screen except the buttons on the LCD screen so that you can use
items. You can change the settings using the [Display Setting] menu.
To record movies in 3D while viewing them in 2D on the LCD screen of the camcorder
If you record 3D movie for a long time, you may feel uncomfortable. Press 2D/3D DISP to
switch the image from 3D to 2D. The image appears in 2D, but the camcorder continues
recording in 3D.
When the screen is switched from 2D to 3D, the screen becomes darker. This is not a
malfunction.

Notes
If you close the LCD screen while recording movies, the camcorder stops recording.

The maximum continuous recordable time of a movie is as follows.

3D: about 6 hours 30 minutes

2D: about 13 hours

When a movie file exceeds 2 GB, the next movie file is created automatically.

It will take several seconds until you can start recording after you turn on the camcorder. You cannot

operate your camcorder during this time.
The following states will be indicated if data is still being written onto the recording media after recording

has finished. During this time, do not apply shock or vibration to the camcorder, or remove the battery or
AC Adaptor.
Access lamp (p. 23) is lit or flashing

The media icon in the upper right of the LCD screen is flashing

US

about 4sec
after