Precautions - Sony HDR-TD10 Guía De Operaciónes

Precautions

On use and care
Do not use or store the camcorder and

accessories in the following locations:
Anywhere extremely hot, cold or humid.

Never leave them exposed to temperatures
above 60 C (140 °F), such as under direct

sunlight, near heaters or in a car parked in
the sun. They may malfunction or become
deformed.
Near strong magnetic fields or mechanical

vibration. The camcorder may malfunction.
Near strong radio waves or radiation. The

camcorder may not be able to record properly.
Near AM receivers and video equipment.

Noise may occur.
On a sandy beach or anywhere dusty. If

sand or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
Operate your camcorder on DC 6.8 V/7.2 V

(battery pack) or DC 8.4 V (AC Adaptor).
For DC or AC operation, use the accessories

recommended in these operating instructions.
Do not let your camcorder get wet, for example,

from rain or sea water. If your camcorder
gets wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
If any solid object or liquid gets inside the

casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
Avoid rough handling, disassembling,

modifying, physical shock, or impact such
as hammering, dropping or stepping on the
product. Be particularly careful of the lens.
Keep the camcorder turning off when you are

not using your camcorder.
Do not wrap your camcorder with a towel, for

example, and operate it. Doing so might cause
heat to build up inside.
When disconnecting the power cord (mains

lead), pull it by the plug and not the cord (lead).
Do not damage the power cord (mains lead)

such as by placing anything heavy on it.
Do not use a deformed or damaged battery

pack.
US

Keep metal contacts clean.

If the battery electrolytic liquid has leaked:

Consult your local authorized Sony service

facility.
Wash off any liquid that may have contacted

your skin.
If any liquid gets in your eyes, wash with

plenty of water and consult a doctor.
When not using your camcorder for a
long time
To keep your camcorder in optimum state for a

long time, turn it on and let it run by recording
and playing back images about once a month.
Use up the battery pack completely before

storing it.
LCD screen
Do not exert excessive pressure on the LCD

screen, as it may cause damage.
If your camcorder is used in a cold place, a

residual image may appear on the LCD screen.
This is not a malfunction.
While using your camcorder, the back of

the LCD screen may heat up. This is not a
malfunction.
To clean the LCD screen
If fingerprints or dust make the LCD screen

dirty, it is recommended that you use a soft
cloth to clean it.
On handling the casing
If the casing is soiled, clean the camcorder body

with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
Avoid the following to avoid damage to the

finish:
Using chemicals such as thinner, benzine,

alcohol, chemical cloths, repellent, insecticide
and sunscreen
Handling the camcorder with above

substances on your hands
Leaving the casing in contact with rubber or

vinyl objects for a long period of time