Switching On And Off / Automatic Shut-Down; Start-Up - Powerfix Profi HG01701B Instrucciones De Utilización Y De Seguridad

To insert the battery proceed as follows:
 
O pen the battery compartment cover on the
back of the device. You can remove the used
battery more easily with the aid of the mate-
rial strip, which is inside the battery compart-
ment
6
 
R emove the used battery.
 
P lug the contacts of the 9 V block battery on
the contacts of the profiled plug. Make sure
you fit the batteries the right way round. This
is specified by the profiled shape of the con-
tacts. Also ensure without fail that the mate-
rial strip is underneath the battery.
 
I nsert the battery in the battery compartment
and close the cover again, so that it audibly
latches into place.
Switching on and off /
 
Automatic shut-down
 
B riefly press the ON/OFF button
switch the device on or off.
Note: If you do not press any button for one
minute after the device has been switched on,
the device automatically switches off.

Start-up


 
B riefly press the ON/OFF button
switch the device on (Fig. A). A selection of
menu points appears at the bottom of the
display
 
T he selection arrow (▼)
point for Beam search (STUD)
. Just pull on the material strip.
:
2
4
4
(Fig. A)
is over the menu
10
, when the
14
GB/IE
to
to
21