Troubleshooting - Omega Lift Equipment MagicLift 29023B Manual De Instrucciones

TROUBLESHOOTING

Symptom
Jack will not lift load
Jack will lift, but not maintain
pressure
Jack will not lower after unloading
Poor lift performance
Will not lift to full extension
Possible Causes
• Release valve not tightly closed
• Load is too heavy
• Release valve not tightly closed
• Hydraulic unit malfunction
• Reservoir overfilled
• Linkages binding
• Fluid level low
• Hydraulic unit malfunction
• Fluid level low
5
Corrective Action
• Ensure release valve tightly closed
• Consider higher capacity jack
• Ensure release valve tightly closed
• Discontinue use, contact Omega
Technical Service
• Drain fluid to proper level
• Clean and lubricate moving parts
• Inspect for damage. If found,
discontinue use and contact Omega
Technical Service
• Ensure proper fluid level
• Discontinue use, contact Omega
Technical Service
• Ensure proper fluid level