Cepex CTD075 Instrucciones De Operación E Instalación página 6

If no changes are implemented, the controller
display will always revert to the main screen
(clock).
Display digits will stop blinking after 40 seconds.
If the last parameter stops blinking before you
have completed your programming, press to
continue the process.
Emergency Irrigation: After inserting batteries
if no buttons are pressed,the clock will blink
continuously. After 10 minutes ,the controller will
implement 5-minute irrigation on a
24-hour cycle.
SETTING CURRENT TIME & DAY OF THE WEEK
Setting The Clock
To enable the irrigation controller to operate
the irrigation system at the required times,the
current time and day of the week must be set as
shown below:
5
EN