Master Forge GR2045401-MF-00 Manual Del Usuario página 19

Electrode Check
With the assistance of another person, perform this Electrode Check before proceeding.
This test will ensure that the Spark Electrode Tips are properly positioned so your
grill lights easily and properly.
Be sure all Control Knobs are set to "OFF" and open the Grill Lids.
Have your assistant stand behind and to the left of the grill and look toward the front
of the grill box. Never put your face inside the Grill Head.
Press the Igniter Cap. You should hear a "clicking" sound. Your assistant should
see a blue spark from Electrode Tips to the burner port; if a spark is present
Electrode Tips are properly positioned.
If no spark is seen, the ignition probe needs to be adjusted by using a collar to
adjust the ignition probe so that it is pointing to the burner port.
Recheck the Electrode; if no "clicking" sound is heard, check if (1) LR-6 /AA Battery
is installed backwards, and (2) electric wires may be loose. Remove the Battery
and inspect the Igniter Junction Box found behind the Control Panel and reconnect
any loose wires.
LIGHTING THE MAIN BURNER OF GRILL
1. Before each use, check all hoses for cracks, nicks, cuts, burns or abrasions. If a hose
is damaged in any way, do not use your grill before replacing the hose with an
authorized part from the Parts List. Also make sure all gas supply connections are
securely tightened.
2. For optimum performance this grill should be used only when outdoor temperatures
are 60 degrees or above.
3. Familiarize yourself with the Safety and Use and Care instructions in this manual. Do
not smoke while lighting grill or checking gas supply connections.
4. Be sure each LP Gas tank is filled, and lock Casters to prevent movement during grill
operation.
5. Open the left and right Lids before lighting the grill.
6. Check that the end of each Burner Tube is properly located over each Valve Orifice.
7. Set all Control Knobs to OFF and open the propane gas tank valve SLOWLY 1/4 of a
turn.
GR2045401-MF-00 / GR2045402-MF-00
Burner Ports
Electrode Tip
19
Burner
20121205