Dascom Tally T2380 Guia De Instalacion página 13

Quick start guide
Rear view
Caution! Be careful not to jam any cables and connectors on the left side of the cut
STOP
device.
Installation
Now stand in front of the printer and
insert the device into your printer
from the top as shown in the
diagram.
At the same time press in the safety
latches ( ) on the right and left.
Make sure that the two guides at the
sides of the cut device fit smoothly
into the two guide tracks on the
inside of the printer (the diagram
shows the right guide track
down the cut device and let go of the
latches.
The cut device is now fixed in place.
Insert the connector ( ) at the side
of the cut device into the colored
socket ( ) on the inside of the
printer. Ensure a snug connection.
Connect the earthing cable ( ) with
the Frame Ground ( ).
). Push
11