Technical Specifications; Noise Conditions - Femi CS 20-140 Manual De Instruccione

Engine power: .................................................................................................................. 2000 W
Voltage and frequency: ......................................................................................... 230 V – 50 Hz
Speed without cutting: ................................................................................................ 3000 RPM
Abrasive disc:
External diameter: ........................................................................................................... 355 mm
Bore diameter: ................................................................................................................. 30 mm
Capacity at 90° (with clamp)
Circle: ............................................................................................................................. 127 mm
Rectangle: ............................................................................................................. 127 x 152 mm
Square: ................................................................................................................. 127 x 127 mm
Paking dimensions
Height: ............................................................................................................................. 430 mm
Width: .............................................................................................................................. 340 mm
Length: ............................................................................................................................ 600 mm
Vibrations hand arm (with load): ..................................................................................... m/sec2
Weight: ................................................................................................................................ 18 kg
The noise emitted, measured in conformity with the standards EN 3744 and EN 11201 is:
- Sound pressure level
- Sound power level
- Uncertainty of measurement
We recommend you to use ear protection devices.
The sources of the noise of the saw are: the electric engine and its ventilation system, the blade
and the material to be cut.
We advise you to control the engine, its ventilation system and the aspiration passages. As far
as the saw blade is concerned, it is preferable to use silenced type of blades and to keep them in
good conditions. We recommend to use the correct saw blade and to keep firmly the workpiece
to be cut. As far as the gears are concerned, you have only to check periodically their consumption
by verifying the play with the saw blade.
Noise levels are emission levels and do not necessarily indicate safe working conditions. Even if
there is a connection between emission levels and exposure levels, the first ones cannot be used
to determine safely if other precautions are necessary. The factors that can influence the actual
exposure level of the operator include the exposure length, environment features and other
sources of noise, as for example the number of machines and operations present. Besides,
exposure levels can change from country to country. However, these instructions enable the user
of the machine to better evaluate the dangers and risks.
EN

TECHNICAL SPECIFICATIONS

NOISE CONDITIONS

LpA = 94,3 dB(A)
LWA = 107,3 dB(A)
K = 3 dB
28